| | | Vertical Vacuum Dryer

Vertical Vacuum Dryer

COMBER Condry® - Series TDC 25 - TDC 15000

The Condry conical bottom agitated vacuum dryer was developed to process a wide variety of products. The machines have proven to be particularly suited for the drying of heat sensitive products as well as products with fragile crystal structure and thus sensitive to shear forces. The conical bottom allows for full product discharge characteristics.

Special properties for the customer’s benefit:

  • In compliance with cGMP and FDA guidelines, also in aseptic/ steam sterilizable versions
  • Excellent product discharge performance with negligible product hold-up due to the conical vessel bottom, very close agitator to wall/bottom clearances and a unique agitator design
  • The agitator permits uniform mixing of the entire product mass, without the formation of lumps or balls
  • The surface area for heat transfer is maximized for optimum performance and cycle times
  • Agitator supported by the top head, with the seal in contact with the vapors only
  • Entirely welded agitator design, without any bolts, without pockets and with all edges rounded for good cleanability
Request product

You are currently viewing a placeholder content from Vimeo. To access the actual content, click the button below. Please note that doing so will share data with third-party providers.

More Information
Unblock content Accept required service and unblock content

COMBER Process Technology S.r.l.
Centro Direzionale Colleoni
Palazzo Cassiopea 1
Via Paracelso, 22
20864 Agrate Brianza (MB)
ITALY

Tel: +39-039-9611-100
Fax: +39-039-9611-199

New and used machines: info@comber.it
After Sales Service: aftersaledept@comber.it

Fields of
applications

Downloads

Technical data

Special properties for the customer’s benefit:

  • In compliance with cGMP and FDA guidelines, also in aseptic/ steam sterilizable versions
  • Excellent product discharge performance with negligible product hold-up due to the conical vessel bottom, very close agitator to wall/bottom clearances and a unique agitator design
  • The agitator permits uniform mixing of the entire product mass, without the formation of lumps or balls
  • The surface area for heat transfer is maximized for optimum performance and cycle times
  • Agitator supported by the top head, with the seal in contact with the vapors only
  • Entirely welded agitator design, without any bolts, without pockets and with all edges rounded for good cleanability
Product wetted materials
 Stainless steels, Nickel based alloys such as Hastelloy C 22 or Alloy 59, Titanium, etc.,
Sealing materials PTFE gaskets, O-Rings in FFKM or FEP encapsulated
Area classification EU-Type Examination Certificate INERIS the 2014/34/EU Directive, or with electrical components UL approved for operation in a Class 1, Division 1 or 2, Groups C&D environment
Controls
 Control cabinet with PLC, HMI with touch screen, MCC, interface for DCS
Guidelines
 Calculation, design and manufacture in accordance with the Pressure Equipment Directive (PED) 2014/68/EU and /or the ASME pressure vessel code, Section VIII, with U-Stamp
Usable volume
 25 – 13,500 liters
Design temperature
 -10 to 150°C (14 to 302°F) or per requirements
Design pressure
 -1 to +0,45 barg (FV to 6.5 psig), -1 to +6 barg (FV to 90 psig) in pressure proof version or per requirements
Heated areas
 All product wetted components, including agitator shaft, arms and blades
Accessories
 Dust filter with automatic back cleaning, sampling valve, CIP system, sight glass with vessel light, vacuum system with condenser, heating and cooling unit etc.

    Send us a
    Product request

    Please enter the following security code: captcha Read privacy policy
    Horizontal Vacuum Dryer COMBER Pharmadry®Horizontal Vacuum Dryer