| | | Filter Dryer with Containment System

Filter Dryer with Containment System

COMBER Pressofiltro® Series PF 50 - PF 2000 with Containment System

Pressofiltro® agitated Nutsche filters or filter dryers with containment system provide protection of the operators against hazardous materials and equally provide product or process safety against possible contamination from external particles.

Special properties for the customer’s benefit:

  • Containment systems (glove boxes) are designed to allow contamination free sampling, product discharge, heel removal and product pack-off into suitable containers
  • Containment systems are available as passive, active, single chamber, two chamber and multiple chamber designs, all in compliance with cGMP and FDA guidelines
  • Active isolator units are equipped with air handling systems and HEPA inlet and exhaust filters for containment levels down to 10 ng/m³ TWA
  • The isolator design permits sampling, product discharge, pack-off, heel removal and filter cloth disposal in a single unit
  • Sample and small items transfer using optional RTP‘s (Rapid Transfer Ports/alpha-beta ports), split butterfly valves, bag-in/ bag-out port
Request product

You are currently viewing a placeholder content from Vimeo. To access the actual content, click the button below. Please note that doing so will share data with third-party providers.

More Information
Unblock content Accept required service and unblock content


COMBER Process Technology S.r.l.
Centro Direzionale Colleoni
Palazzo Cassiopea 1
Via Paracelso, 22
20864 Agrate Brianza (MB)
ITALY

Tel: +39-039-9611-100
Fax: +39-039-9611-199

New and used machines: info@comber.it
After Sales Service: aftersaledept@comber.it

Fields of
applications

Downloads

Technical data

Special properties for the customer’s benefit:

  • Containment systems (glove boxes) are designed to allow contamination free sampling, product discharge, heel removal and product pack-off into suitable containers
  • Containment systems are available as passive, active, single chamber, two chamber and multiple chamber designs, all in compliance with cGMP and FDA guidelines
  • Active isolator units are equipped with air handling systems and HEPA inlet and exhaust filters for containment levels down to 10 ng/m³ TWA
  • The isolator design permits sampling, product discharge, pack-off, heel removal and filter cloth disposal in a single unit
  • Sample and small items transfer using optional RTP‘s (Rapid Transfer Ports/alpha-beta ports), split butterfly valves, bag-in/ bag-out port
Product wetted materials
 Stainless steels, Nickel based alloys such as Hastelloy C 22 or Alloy 59, Titanium, etc.,
Sealing materials PTFE gaskets, O-Rings in FFKM or FEP encapsulated
Area classification EU-Type Examination Certificate INERIS the 2014/34/EU Directive, or with electrical components UL approved for operation in a Class 1, Division 1 or 2, Groups C&D environment
Controls
 Control cabinet with PLC, HMI with touch screen, MCC, interface for DCS
Guidelines
 Calculation, design and manufacture in accordance with the Pressure Equipment Directive (PED) 2014/68/EU and /or the ASME pressure vessel code, Section VIII, with U-Stamp
Filter area
 0.13 to 2 m²
Slurry volume
 55 – 2,000 liters
Design temperature
 -10 to 150°C (14 to 302°F) or per requirements
Design pressure
 -1 to +4 barg (FV to 60 psig) or per requirements
Heated areas
 All product wetted components, including agitator
Accessories
 Dust filter with automatic back cleaning, sampling valve, CIP system, sight glass with vessel light, vacuum system with condenser, heating and cooling unit etc.

    Send us a
    Product request

    Please enter the following security code: captcha Read privacy policy
    Filter Dryer Chemical DesignCOMBER Pressofiltro® Chemical DesignSterilizable Units COMBER Pressofiltro®Sterilizable Filter Dryer